KIB Battery Disconnect Latching Relay For Jayco #LR9806J-BIP
The latching relay is an effective battery disconnect device. The LR9806J-BIP is a single-pulse latching relay. It only requires a short “pulse” of voltage to activate or deactivate the relay. Since the LR9806J-BIP does not require constant voltage, it is one less load on the battery
J-BIP version has a small circuit board attached to the positive terminal of the relay coil. The is a protection circuit that removes voltage from the coil after a time delay to protect the coil should the switch become stuck in the closed position, or the wiring become grounded.
- Coil Rating 12VDC – 4.4
- Non-Polarity Sensitive
- Min. Activation Voltage 7VDC
- Contact Type:
- 110 amps carry 6-36VDC
- Latch Type: Mechanical Push On/Push Off Coil Activated
- Replaces Obsolete Part LR9806J
What is a Latching Relay?
A latching relay is a two-position electrically-actuated switch. It is controlled by two momentary-acting switches or sensors, one that ‘sets’ the relay, and the other ‘resets’ the relay. The latching relay maintains its position after the actuating switch has been released, so it performs a basic memory function.
Even after the input voltage is interrupted, this KIB Battery Disconnect Latching Relay For Jayco #LR9806J-BIP maintains its set or reset condition until it receives the next inverting input. It is also called a keep relay. There are two types of mechanisms for maintaining the set and reset conditions: a magnetic holding type and a mechanical holding type.